Toysdownunder

Skip to Main Content »

Search Site
Welcome to toysdownunder.com. Arduino Uno, Arduino Mega 2560, and Walkera spare parts.

Category Navigation:

You're currently on:

    • Product Practical Arduino ProtoShield - PCB successfully added to compare list
    • Product SpeakJet successfully added to compare list
    • Product SpeakJet successfully added to compare list

SpeakJet

Be the first to review this product

Availability: In stock.

$ 32.25
Add Items to Cart
OR

Quick Overview

The SpeakJet is a completely self-contained, single-chip voice and complex sound synthesizer. It uses a mathematical sound algorithm to control an internal five channel sound synthesizer to generate on-the-fly, unlimited vocabulary speech synthesis and complex sounds.

SpeakJet

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • SpeakJet
  • SpeakJet

Product Description

The SpeakJet is a completely self-contained, single-chip voice and complex sound synthesizer. It uses a mathematical sound algorithm to control an internal five channel sound synthesizer to generate on-the-fly, unlimited vocabulary speech synthesis and complex sounds.

The SpeakJet is pre-configured with 72 speech elements (allophones), 43 sound effects, and 12 DTMF Touch Tones. Through the selection of these sounds, and in combination with the control of the pitch, rate, bend, and volume parameters, the user has the ability to produce unlimited phrases and sound effects, with thousands of variations, at any time.

The SpeakJet can be controlled simultaneously by logic changes on any one of its eight Event Input lines, and by a single I/O serial line, allowing for both CPU-controlled and stand-along operations.

Features:

  • Programmable, 5-channel synthesizer
  • Natural phonetic speech synthesis
  • DTMF and other sound effects.
  • Programmable control of pitch, rate, bend and volume.
  • Programmable power – up or reset announcements.
  • Multiple modes of operation.
  • Simple interface to microcontrollers.
  • Simple “Stand Alone” operation.
  • Three programmable digital outputs.
  • Internal 64 Byte input buffer.
  • Internal programmable EEPROM.
  • Extremely low power consumption.
  • Low pin count.
  • Multiple case styles available.

Documents: 

 

 

You may also be interested in the following product(s)

DIP Socket Solder Tail - 18-Pin

DIP Socket Solder Tail - 18-Pin
$ 0.85

VoiceBox Shield

VoiceBox Shield
$ 39.95

Voice Recorder Breakout - ISD1932

Voice Recorder Breakout - ISD1932
$ 17.25

Arduino - Speech Synthesizer Kit

Arduino - Speech Synthesizer Kit

From: $ 0.00

To: $ 35.60

 

My Cart

You have no items in your shopping cart.

Compare Products - 139 Items

  1. Remove This Item HM-5#10-Z-15 Gear Set
  2. Remove This Item Walkera 4G3 (2.4G)
  3. Remove This Item HM-5G6-1-Z-15 Screw Set
  4. Remove This Item HM-5G6-1-Z-18 Main Motors
  5. Remove This Item HM-5G6-1-Z-20 Battery
  6. Remove This Item HM-4#3B-Z-01/HM-CB100-Z-11 Main Rotor Blades
  7. Remove This Item HM-4#3B-Z-11/HM-CB100-Z-13 Landing Skid
  8. Remove This Item HM-5#10-Z-01 Main Rotor Blades
  9. Remove This Item HM-5#10-Z-03 Balance Shaft
  10. Remove This Item HM-5#10-Z-04 Linkage Set
  11. Remove This Item HM-5#10-Z-05 Vertical Stabalizer
  12. Remove This Item HM-5#10-Z-07 Tail Rotor Blade
  13. Remove This Item HM-4G3-Z-06 Flybar Connector
  14. Remove This Item HM-4G3-Z-07 Flybar Paddle
  15. Remove This Item Slim Clip - Money Clip Pack of 5
  16. Remove This Item HM-4G3-Z-08 Swashplate
  17. Remove This Item HM-4G3-Z-13/HM-4G6-Z-11 Main Rotor (Spindle) Shaft
  18. Remove This Item HM-4G3-Z-35/HM-4G6-Z-06 Main Blades Holder (Metal upgrade)
  19. Remove This Item HM-4G3-Z-39 Brushless Main Motor
  20. Remove This Item HM-4G3-Z-40/HM-4G6-Z-36/HM-4#6-Z-33 Brushless Speed Controller
  21. Remove This Item HM-4G3-Z-41 Brushless Receiver (RX-2605A)
  22. Remove This Item HM-4G3-Z-42 Brushless Tail Motor
  23. Remove This Item HM-4G3-Z-45 Brushless Tail Motor Holder
  24. Remove This Item HM-4#3B-Z-40/HM-CB100-Z-22 Brushless Tail Motor Holder
  25. Remove This Item Arduino MEGA
  26. Remove This Item LilyPad Arduino Main Board
  27. Remove This Item FTDI Basic Breakout - 5V
  28. Remove This Item FTDI Basic Breakout - 3.3V
  29. Remove This Item Breadboard Mini Self-Adhesive
  30. Remove This Item Needle Nose Pliers
  31. Remove This Item LilyPad Button Board
  32. Remove This Item LilyPad Bright White LED
  33. Remove This Item LilyPad Tri-Color LED
  34. Remove This Item LilyPad Protoboard Small
  35. Remove This Item Conductive Thread - 117/17 2ply
  36. Remove This Item LilyPad Temperature Sensor
  37. Remove This Item USB miniB Cable - 1.8m
  38. Remove This Item ATmega328 with Arduino Bootloader
  39. Remove This Item Mini Push Button Switch
  40. Remove This Item Break Away Headers - Right Angle
  41. Remove This Item Break Away Headers - Female
  42. Remove This Item Break Away Headers - Straight
  43. Remove This Item Jumper Wires Premium M/M
  44. Remove This Item Jumper Wires Premium F/F
  45. Remove This Item Kingston 2GB Micro SD Card
  46. Remove This Item HM-LAMA2-Z-06 Ball Linkage Set
  47. Remove This Item Breadboard Mini Self-Adhesive Blue
  48. Remove This Item Tweezers - Curved
  49. Remove This Item Triple Axis Accelerometer Breakout - LIS302DL
  50. Remove This Item IR Receiver Breakout - TSOP85
  51. Remove This Item PIR Motion Sensor
  52. Remove This Item XBee 2mW Series 2.5 Chip Antenna
  53. Remove This Item Diagonal Cutters
  54. Remove This Item Dual Motor GearBox
  55. Remove This Item Jumper Wires Premium M/F
  56. Remove This Item Arduino XBee Shield Empty
  57. Remove This Item HM-5G6-1-Z-08 Small Shaft
  58. Remove This Item Arduino UNO Starter Kit - Flex
  59. Remove This Item SoftPot Membrane Potentiometer - 50mm
  60. Remove This Item Ardumoto - Motor Driver Shield
  61. Remove This Item Gyro Breakout Board - LISY300AL 300 degree/sec
  62. Remove This Item Thermistor 10K
  63. Remove This Item Arduino MEGA Starter Kit
  64. Remove This Item Breadboard Mini Self-Adhesive Red
  65. Remove This Item Super Bright LED - Blue - 4,000mcd
  66. Remove This Item Ultrasonic Range Finder - Maxbotix LV-EZ1
  67. Remove This Item Momentary Push Button Switch - 12mm Square
  68. Remove This Item Omron Snap Action Switch
  69. Remove This Item One Wire Digital Temperature Sensor - DS18B20
  70. Remove This Item Infrared Proximity Sensor - Sharp GP2Y0A21YK
  71. Remove This Item TLC 5490 NT - 16 channel PWM unit
  72. Remove This Item Mini Thumb Joystick
  73. Remove This Item Logic Level Converter
  74. Remove This Item Trimpot 10k
  75. Remove This Item Screw Terminals 3.5mm Pitch (2-Pin)
  76. Remove This Item 8x2 Character LCD - Grey - 5V
  77. Remove This Item Serial 16x2 LCD Backpack board
  78. Remove This Item Wire Strippers 30AWG
  79. Remove This Item USB A to B Cable - 1.8m
  80. Remove This Item AVR Stick
  81. Remove This Item Metal Hex Standoffs
  82. Remove This Item Pogo Pins with Chiseled Tip
  83. Remove This Item Nordic FOB
  84. Remove This Item Jumper Wires M/M - Pack of 70
  85. Remove This Item 74HC595 - 8 bit shift register
  86. Remove This Item PICAXE-08M microcontroller chip
  87. Remove This Item Getting Started with Arduino
  88. Remove This Item PICAXE 40 Pin x2 Microcontroller
  89. Remove This Item PICAXE-08M Starter Pack
  90. Remove This Item PICAXE-14M Starter Pack
  91. Remove This Item PICAXE-28x Starter Pack
  92. Remove This Item PICAXE USB Programming Cable
  93. Remove This Item PICAXE Serial Programming Cable
  94. Remove This Item PICAXE Bread Board Adapter
  95. Remove This Item PICAXE 8 Pin Motor Driver Board
  96. Remove This Item Arduino TellyMate Shield
  97. Remove This Item PICAXE 28/40 Pin Protoboard
  98. Remove This Item DIP Socket Solder Tail - 8-Pin
  99. Remove This Item Screws 4-40 Thread Black
  100. Remove This Item Interface Cable for EM401 and EM406 - 1 Foot
  101. Remove This Item Nintendo DS Touch Screen
  102. Remove This Item Button Pad 2x2 - Breakout PCB
  103. Remove This Item 9v Battery Snap
  104. Remove This Item Potentiometer - Linear
  105. Remove This Item Triple Axis Accelerometer Breakout - MMA7260Q
  106. Remove This Item Humidity and Temperature Sensor - SHT15 Breakout
  107. Remove This Item LiPo Charger - Single Cell 3.7-7V Input
  108. Remove This Item PICAXE 8 Pin Proto Kit
  109. Remove This Item XBee 2mW Series 2.5 U.FL Connection
  110. Remove This Item Breadboard Jumper Wire Kit without Case
  111. Remove This Item IMU 5 Degrees of Freedom IDG500/ADXL335
  112. Remove This Item Force Sensitive Resistor - Round
  113. Remove This Item Force Sensitive Resistor - Square
  114. Remove This Item WiiChuck Adapter
  115. Remove This Item Practical Arduino ProtoShield - PCB
  116. Remove This Item SpeakJet
  117. Remove This Item P-Channel MOSFET 60V 27A
  118. Remove This Item Bluetooth Mate Silver
  119. Remove This Item EasyDriver Stepper Motor Driver
  120. Remove This Item SparkFun Inventor's Kit for Arduino - Carrying Case
  121. Remove This Item Barometric Pressure Sensor - BMP085 Breakout
  122. Remove This Item Arduino ProtoShield Kit
  123. Remove This Item Arduino MEGA Starter Kit - Flex
  124. Remove This Item Walkera 4F200LM BLUE with WK-2603
  125. Remove This Item 4F200LM Canopy HM-4F200LM-Z-09 BLUE
  126. Remove This Item Arduino Cookbook
  127. Remove This Item Ardumoto - Motor Driver Shield Retail
  128. Remove This Item Small Stepper Motor
  129. Remove This Item PICAXE 20M2 Microcontroller (20 pin)
  130. Remove This Item Padded Canvas Bag - Large
  131. Remove This Item ProtoSnap - Pro Mini
  132. Remove This Item Pololu m3pi Robot with mbed Socket
  133. Remove This Item Servo - Large
  134. Remove This Item PWM Shield
  135. Remove This Item Serial Servo Controller
  136. Remove This Item Genius CP with DEVO 7
  137. Remove This Item SI4735 AM & FM Receiver Shield
  138. Remove This Item Walkera HM-Genius cp-z-09 Tail Boom
  139. Remove This Item Solenoid - 5v (small)
Clear All

Recently Viewed Products

  1. WiiChuck Adapter
  2. Infrared Proximity Sensor - Sharp GP2Y0A21YK
  3. Arduino MEGA