Check items to add to the cart or select all
Product Description
Overview
These tiny, high-quality motors are intended for use at 6 V. In general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 9 V range. Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. All of the micro metal gearmotors have the same physical dimensions, but they come in a wide range of gear ratios—from 5:1 up to 298:1—and let you choose between two different motors: high-power (HP) and standard. This means you can choose the version that has the ideal blend of speed, torque, and current-draw for your particular application. Please see the table at the bottom of this page for detailed specifications.
Use these brackets for easy installation.
Gearmotor Dimensions
 |
| Micro metal gearmotor dimensions (units in mm). |
|---|
This motor has a long (0.365" or 9.27 mm), D-shaped metal output shaft, and the brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35 mm thread pitch). It weighs approximately 0.35 oz (10 g).
Dimensions
| Size: | 24 x 10 x 12 mm |
|---|---|
| Weight: | 0.34 oz |
General specifications
| Gear ratio: | 50:1 |
|---|---|
| Free-run speed @ 6V: | 250 rpm |
| Free-run current @ 6V: | 40 mA |
| Stall current @ 6V: | 360 mA |
| Stall torque @ 6V: | 6 oz·in |
You may also be interested in the following product(s)
|
Pololu 3pi Robot
$ 96.75
|
Micro Metal Gearmotor Bracket Pair - Black
$ 5.25
|
Pololu 42x19mm Wheel and Encoder Set
$ 39.95
|
Tamiya 70096 Off-Road Tires (2 tires)
$ 5.95
|
